ATV Television's Blog

The Latest News and Doug's Ramblings & Ravings.
Including Doug's "Here's what I think!" and "What were they thinking!"

Wednesday, November 17, 2010

The UMP Filter for the Polaris RZR:

As you may remember, I have searched for a solution to the RZR intake problem for quite sometime. If you’re a RZR owner or even a RZR want-to owner you no-doubt know what we’re talking about.

We’ve had a new RZR every year since they came out and we have never had a problem with the stock filter system not doing its job properly. But we continue to hear enough horror stories about RZR engines being destroyed to think that there must be something going on. Although Polaris claims to have fixed the so-called intake leaks on the RZR, it seems the talk continues about dirt leaking into the intake and ‘sanding’ the engine, sometimes with several hundred miles of use!

No matter what, there’s enough talk that I wanted to be sure that my RZR wasn’t going to suffer a dirt meltdown if there was a way to prevent it. After all, I’m too-often too far from civilization to have more things to worry about…

We’ve talked to RZR owners with their solutions – most of which require home-built fabrications. What I wanted was a bolt-on solution that I could be sure of.

I have used K&N filters for many years on many different types of off-road race vehicles with never a problem, so that was my first effort. The K&N system went on easy enough, although requiring the removal of the bed and bulkhead for better access.

While the K&N filter system may do an incredible job of keeping dirt from entering the RZR’s engine, the one item I didn’t think to consider was the additional intake sounds due to its open design. Intake noise is seldom a problem on race cars, but on a RZR designed to explore the back country, quieter is a better thing to have rather than noisier!

Under acceleration or with enough throttle to climb mountains, the additional intake noise definitely was more than noticeable. For me it was bothersome as it really reduced the ability to easily talk with your passenger.

So I continued to look at options. One of you wrote me suggesting I check out the UMP filter system. So I did. It didn’t take long before UPS delivered the UMP for me to try out. The UMP is a great canister system that is designed to have the air flow spin into the system. Plus it is a fully sealed unit and pulls the air into the filter through the stock intake tube. One important item to remember in all this is that the K&N filter claims to add power (which it seems to do) and the UMP filter makes no claim other than to better filter the air that goes into the engine. And that it seems to do.

Like the K&N (and any filter system I suppose) the installation of the UMP filter requires the removal of the bed and the bulkhead. The first thing I noticed is that the UMP canister mounts very, very securely, better than both the K&N and the stock filters.

I like the idea that the UMP unit is a more sealed unit and uses the stock air intake tube. And that’s no doubt part of the reason that there is little or no increase in power for the UMP filter. But once again, this unit is not about increasing power, it’s about eliminating the destruction of your RZR’s engine without any additional noise irritating you or your passenger while trying to enjoy a great trail ride.

We’ll have an installation video and a follow-up as we put some miles on our RZR. But some times you can just ‘see’ that a product is built correctly and do the job it was meant to do.

I’m no longer worrying about getting dirt in my intake and ruining my RZR. No-sir-ee, now I’m free to worry about other things!





Thursday, November 11, 2010

Arctic Cat New Model Introduction – What I Hope to See:

Arctic Cat has invited a group of media reps to Texas to look at and ride some all-new models being introduced for 2011!

Yippee I’m going, and here’s what I hope I see:

First and foremost I hope we see an all-new Prowler. Or maybe we should call it the ThunderCat  Side by Side. Built from the Thundercat it would be a 50” wide, 1000cc, all independent UTV. Although you’ll first think I’m thinking about an Arctic Cat RZR, think again. The Arctic Cat would be built to be the ultimate trail machine. The 1000cc engine would be detuned for more torque. The transmission would be an industry first centrifugal clutch. The rear would be a nice metal cage-rack system and another smaller rack system at the front. It would come with a spare tire, a large fuel tank, and a low, narrow cage to fit better under and around the trees. It would retain the great AC suspension but also come standard with a great set of radials – maybe the Carlisle ACT HDs!

Years ago we tested an amazing little Arctic Cat that I fell in love with – a 250CC 4x4. It was a small, Recon-sized ATV with 4 wheel drive. It was so nimble and competent and yet so manageable it was amazing….. So, that what I hope to see, a small 4wd ATV. Simple. Basic. Inexpensive. Competent. And fun! And hopefully it would come with a $3995.00 price tag.

I’d also love to see some sport versions of the Cruiser 550 and 700 ATVs. Now when I say ‘sport’, what I mean is really, an ATV set up ‘ready to use’! Better shocks. Good radial tires. A winch, heated grips, and good, sturdy cargo boxes front and rear. Maybe even with a set of RotopaX fuel packs attached…..

We’ll see just how close I get. If my wishes and hopes for Arctic Cat are no closer than my wishes and hopes for Polaris I’ll be 0 for 3! Oh well they’re loss.

And here I was going to help them rule the world.

Maybe another day………